FileFour (page 6 of 9)

Continuation of 'Ideas of How Dowsing Works'----

E. Contact #2 Component: Testing the aura theory.......an energy field extends beyond each of our bodies.  There is reliable research regarding this extra-body radiation field.  The energy field appears to wax and wane, that is, it may only extend a few inches beyond the body, while at other times it may extend outward several feet.

I wondered----from what part of my body did this energy radiate?  I thought of the various body openings on the front of the body (ears, eyes, nostrils, breasts, naval and genitalia), and even the top of the head.  The area of the posterior or anterior fontanel (even though closed) came to mind as a possible main source of body energy radiation----the brain must be continuosly generating a significant amount of neural activity.
 
Using some regular kitchen tinfoil, I tried several little tests alternately covering my head, ears, breasts, naval and genitalia with the foil.  I ruled out the eyes as I believe that they function as an 'input' source.

With tinfoil taped or clipped to the above identified parts of the body I tried several dowsing passes over a target.  Only when I covered the top of my head with tinfoil did I find that the rods would not move when I dowsed over a target.

It appears to me that the top of the head is the primary source of body energy radiating into a surrounding auric field.

I believe that the aura energy field affects the tips of the L-rods.  The thumbs appear to initiate one electrical energy pole at the handle end of the rods and the body aura appears to initiate an electrical energy pole at the tip end of the rods  causing the rods to move.  This auric energy must be swirling around the body because of the sideways motion of the L-rod tips.

Test E-1: This test involves extending the rods in front of the dowsing person's body.  Hold the rods at the normal height, but extend them about a foot further outward beyond your body.
My results:  normal rod movement.
Person #1: same as above.
Person #2: same as above.

Test E-2: Continue to extend the rods further out in front of your body as you dowse over the target repeatedly.  Keep the rods as close to the normal waist high height as possible while extending them forward.
My results: no rod movement when my arms/hands that are holding the rods are at least 3/4 distance to fully extended in front of my body.
Person #1: same as above.
Person #2: The rods still moved even when extended fully beyond the body.

I believe that this simple test is an indicator that some force is operating on the tips of the rods and when the rod tips are extended too far from the body, the rods will not move.  I believe that the body aura is this unique external body force.

Insert -- New Test E-3: Using the previously described/pictured wired, headset, I decided to try the following test.

--1. I put the bare wire-wrapped headband firmly on the top of my head.
--2. A long, thin wire extended from the headset and was clipped to the tip of my   
       right rod.
--3. I also used the left rod normally (without wire attached from headset to tip). 
--4. I fully extended both arms holding the rods in front of my body, keeping
       both eyes open, and walked over the target.
My results: The right rod moved but the left rod remained stationary.
(
Note: Person #1 & 2 not tested)

Insert -- New Test E-4: I used the same set-up as above only I closed my right
       eye and then walked over the target.
My results: The right rod moved, but in the opposite direction, while the left rod
       remained stationary.
(
Note: Person #1 & #2 not tested)

My conclusions:  Normally when I walked over the target with my arms holding the rods fully extended forward, the rods would not move.
But when I used the headset and wire extended and clipped to the tip of one rod, I intercepted the auric signal and transferred the signal directly to the tip and movement occurred.

Insert -- New Test E-5:  While dowsing numerous unmarked children's graves in a rural cemetery with an associate (Sept., 2013), I noticed our own shadows around 10:00 in the morning were quite distinct and long.  I dowsed the associate's shadow (about 4 feet distance from the standing person) and was surprised to find that my dowsing rods registered a signal when passing over the shadow.  The associate did the same with my shadow and received similar positive results.  Of course we dowsed the same area without our human shadows in the dowsing path and we did not register any positive results from buried objects.

I wonder if the human shadow has some type of body aura associated with it that caused the positive dowsing results in our test.  I would like to hear from other dowsers who would be willing to report results from this interesting test.  (dowsfiles@gmail.com) [see also FileFive-7]

>>>>>>>>>>>>>>>>>>>
Here are some basic tests (revised) investigating the electrical properties of the dowsing signal and the L-rods.  You will need a 3 foot (or so) length of light-weight wire with clips on the wire ends.  Note: the wire needs to be light and flexible enough so that it does not impede the swinging motion of the L-rods.

Test X-1: With the normal dowsing setup, use two L-rods with one end of the wire clipped to the handle end and the other end of the wire clipped to the tip end of the same rod.
My results: rod movement with the non-wired rod but no rod movement with the wired rod.
(
Note: Person #1 & #2 not tested)

Test X-2: Perform the same test as above, but close your eye on the side where the rod has a wire clipped from handle end to tip end.
My results: Same results as in test X-1....rod movement with the non-wired rod but no rod movement with the wired rod.
(
Note: Person #1 & 2 not tested)

Test X-3:  Perform the same test as above, but close your eye on the side opposite of the wired rod side.
My results: Same results as in test X-2....rod movement with the non-wired rod but no rod movement with the wired rod.
(
Note: Person #1 & #2 not tested)

Test X-xx: Try variations where the wire is clipped to both rods--- that is connect the wire from the handle end of one rod to the handle end of the other rod......keep both eyes open.....and observe the results.  It appears to me that the wire short-circuits an electrical impulse and impedes rod movement.

(End of page 6 of FileFour.......countinue to page 7)